Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Aftermarket Car Radio

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Car stereo

Remove the plastic trim and use the appropriate tools to insert them at the sides of the old radio to allow for its extraction. Disconnect the various connectors and remove the car radio. Remove the old additional wiring and install the wiring supplied with the new radio, paying attention to the references. Connect the adapter to the antenna cable with the new connector. Reconnect the cables to the radio by inserting the respective connectors and place the radio into its slot, taking care not to pinch the cables until it is secured. Turn on the radio to check its functionality.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Car Radio from a Fiat Grande Punto
Removing the Car Radio from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Want to remove the car radio from a Grande Punto? Use the original or aftermarket metal keys to remove the car radio. Insert the keys into the slots …
How to Remove an Original Car Radio from a Fiat Grande Punto
How to Remove an Original Car Radio from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove an original car radio from a Fiat Grande Punto? Carefully follow these steps to dismantle the radio. Use the original or aftermarket me…
How to Remove the Car Radio from the Dashboard of a Fiat Grande Punto
How to Remove the Car Radio from the Dashboard of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to remove the car radio from the dashboard of a Fiat Grande Punto: use the original or aftermarket metal keys to remove the car st…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos