Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Fiat 500?

Model: Fiat 500 - Years 2007-2022
Part: Cabin air filter

Replacing the cabin filter of the Fiat 500 is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, let's go to the passenger seat, then remove the front right panel of the central tunnel by removing the corresponding fixing screw. Next, locate the long rectangular door located right in front of the partition wall, unscrew the two indicated bolts and open it. At this point, we can remove the old filter, clean the housing from any possible dirt residue, and insert the replacement. To reassemble everything, just follow the reverse procedure.

Posted on 3 November 2023 by ScegliAuto

Video tutorial

Related tutorials

How to change the cabin air filter on a Fiat 500
How to change the cabin air filter on a Fiat 500
Fiat 500 (2007-2024 / 312) In this video we see how to remove the cabin air filter on a Fiat 500. The cabin filter can be found at the bottom left of the glove box. With a plas…
How to replace the cabin filter of a Fiat 500.
How to replace the cabin filter of a Fiat 500.
Fiat 500 (2007-2024 / 312) Let's see today how to replace the cabin filter on a 2018 Fiat 500. Let's start the procedure by unscrewing, with a T25 Torx key, the screw of the si…
Replace the cabin filter on Fiat 500
Replace the cabin filter on Fiat 500
Fiat 500 (2007-2024 / 312) We replace the pollen filter of the Fiat 500 if worn, let's see how. With a plastic lever we detach the coating placed in the lower right part of the…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos