Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
500 X
- Years 2014-2022 In this video tutorial, we can see how it is possible to replace the horn fuse in a Fiat 500X, following some simple steps that will allow you to work independently on your vehicle. The fuse box that contains the horn fuse can be found in the engine compartment, as shown in the video. Once the fuse box is located, to open it, we need to remove the small door. We can see that there is a plastic screw at the bottom of the box, so we take a flathead screwdriver to unscrew the screw that secures the door; push downwards and rotate the screw to the left to unscrew it until it is fully removed (the screw comes out of its slot because there is a spring). At this point, we can remove the door. The horn fuse is located at the top right, the second one from the right, which is a 10 Amp (F10) red fuse (check the fuse diagram inside the fuse box door to make sure it is the correct fuse to remove). Once identified, simply use tweezers to remove the non-working fuse from its slot; then replace it with the working one, and finally reassemble all the parts by following the reverse steps.
Posted on 6 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |