Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

LED Light Kit Installation on Fiat Freemont

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

Video tutorial

Replacing the original bulbs (H11 dipped beam, Hb3 main beam) in the front headlights with LED types will certainly improve road illumination and visibility, while giving the vehicle a more modern and appealing look. The installation does not require significant modifications apart from removing the old bulbs and inserting the new ones with the appropriate adapter wiring.

Additionally, there is enough space in the engine bay to work behind the headlights without needing to remove them. Installing the LED bulbs in one headlight first will immediately show the difference compared to the original bulbs.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on Fiat Freemont
How to Replace the Air Filter on Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) Remove the engine air filter on a Fiat Freemont: open the car door, pull up the engine compartment release lever located at the bottom left of the da…
Where are the fuses located in the Fiat Freemont?
Where are the fuses located in the Fiat Freemont?
Fiat Freemont (2011-2016 / MK 1) The fuses in the Fiat Freemont are divided within the specific fuse boxes installed in the vehicle. This model has two fuse boxes: the first is locat…
How to Remove the Rear Interior Lights of the Fiat Freemont
How to Remove the Rear Interior Lights of the Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) This video shows how to change the rear interior lights of the Fiat Freemont, namely the rear lights and reverse light. You will need a 7 mm spanner …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos