Do it yourself
| ||||
|
Fiat Ducato - Video tutorial
Model: Fiat Ducato
- Years 2002-2006 It should be noted that in order to replace the shock absorbers it is necessary to have the appropriate clamp tool to crush the spring and separate it from the shock absorber; start by lifting the vehicle to remove the front wheel and lubricate the four pins that secure the shock absorber plate to the hub support with release spray; unscrewed these pins you must access the passenger compartment rather than the engine compartment to intercept the dome which is located just under the dashboard which must therefore be removed; once the fixing pins of the support have been disassembled and the complete shock absorber has been removed from its seat, squeeze the spring with the clamps and disassemble the support from the stem and then apply bellows, spring and support on the new damper, proceeding backwards for installation on the vehicle.
Posted on 13 September 2023 by ScegliAuto
How to remove the front shock absorbers of the Fiat Ducato
Fiat Ducato (2002-2006 / ) To disassemble the Fiat Ducato shock absorbers, start by unscrewing the screws on the panel above the accelerator and the brake, remove the piece, ta
How do you replace the front shock absorber on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) In order to replace the front shock absorber of the Fiat Ducato, the vehicle must be lifted so that the wheels are not in contact with the floor: in
How to remove the front shock absorber on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) How to remove the front shock absorber on a Fiat Ducato? We loosen the pins of the rim, lift the car onto a column bridge and take out the wheel; uns Other guides that may interest you
|
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |