Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlamp Bulbs on the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Headlight bulb

Follow these steps to replace the headlamp bulbs on the Fiat Panda. Open the bonnet and position yourself in front of the headlamp containing the bulb to be replaced. On the engine side of the headlamp, you will find two caps protecting the bulbs. The one closest to the radiator is for the indicator bulb; remove it and rotate the bulb holder a quarter turn to extract it. Replace the burnt bulb with a new one and refit the bulb holder, securing it in place, then replace the protective cap. Moving towards the wheel arch, you will find the cap for the main bulb; remove it, disconnect the connector, pull out the bulb and insert the new one, taking care not to touch the glass with bare fingers. Reconnect the connector and insert the rubber cap.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlamp Bulb on the Fiat Panda
How to Replace the Rear Headlamp Bulb on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) To replace the rear headlamp bulb on the Fiat Panda, open the tailgate to access the two bolts located between the seal and the headlamp. This will a…
How to Replace the Rear Headlamp Bulbs on the Fiat Panda 2
How to Replace the Rear Headlamp Bulbs on the Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) Today, in this video tutorial, we will see how to disassemble and replace the rear headlamp bulbs on the Fiat Panda 169, second generation. First, op…
Removing the Front Headlamp of a Fiat Panda
Removing the Front Headlamp of a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) In this video, you will see how to remove the front headlamp of the classic Fiat Panda. First, open the bonnet and remove the protective cover of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos