Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlamp Bulbs on the Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Headlight bulb

If a headlamp bulb on your Fiat Ducato burns out, replace it as soon as possible for your safety and to avoid penalties. Open the bonnet and use a Torx key to unscrew the two screws securing the headlamp unit containing the bulb to be replaced. The first screw is near the radiator and the other is near the drip tray. Pull out the headlamp and disconnect the electrical connector. You can now rotate it and work easily. Remove the rubber cap protecting the bulb. Release the clip holding it in place and pull out the connector. Take out the old bulb and insert the new one, then reassemble everything in reverse order.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the low beam headlight bulb of the Iveco Ducato X250
Replacement of the low beam headlight bulb of the Iveco Ducato X250
Fiat Ducato (2006-2014 / X250) If one of the lamps in the front headlight of the Iveco Ducato were to burn out, for our safety, we must replace it as soon as possible. First, we op…
How to Replace the Dipped Beam Bulb on Fiat Ducato
How to Replace the Dipped Beam Bulb on Fiat Ducato
Fiat Ducato (2014-2026 / X290) How to replace the bulb on a Fiat Ducato? Start by lifting the front bonnet, locate the back of the headlamp, and remove the plastic cover cap. If yo…
Replacing the Headlamp Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) How do you replace the headlamp bulb on a Ducato? Lift the bonnet and find the back of the front headlamp. You can remove the front headlamp if space…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos