Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Instrument cluster

In this tutorial, see how to replace the instrument cluster in the Fiat 500, a very simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to work safely. Start by entering the cabin, then remove the indicated screws and take off both covers of the steering column. Next, unclip the panel containing the air vent, unscrew the newly exposed screw with a Torx T9 screwdriver, and remove the outer frame of the instrument cluster. At this point, simply unscrew the fixing screws, pull it out from the dashboard, and disconnect the internal connector. To fit the replacement, just follow the reverse procedure.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Tyres on Fiat 500
Reset Tyres on Fiat 500
Fiat 500 (2012-2023 / 500 L) Reset tyres on a Fiat 500? Here's how to reset the warning light. Turn on the instrument cluster of the Fiat 500 with the key, then switch on the ins…
How do you perform the service and reset the service light in the Fiat 500 X?
How do you perform the service and reset the service light in the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) In this short video guide, we see the essential steps and tools to use for a maintenance service of the Fiat 500, including changing the engine oil, …
How to Reset Service Light on Fiat 500
How to Reset Service Light on Fiat 500
Fiat 500 (2007-2021 / 312) How to reset the maintenance light on a Fiat 500? Check how to reset the light from above the instrument cluster. Enter the cabin and turn on the ins…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos