Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
500 X
- Years 2014-2022 Replacing one or more bulbs in the 2015 Fiat 500X is a very simple operation that can be done independently. All you need to do is purchase the bulbs online and insert them into the appropriate sockets. The first thing to do is to remove the panel located on the wheel arch, which provides access to the various bulbs. This panel is located on both the right and left side of the vehicle. Remove the panel, as shown in the video, and let's start by disconnecting the bulb holders. The brown bulb holder on the right is for the position lights, while the one on the left is for the turn signals. So, let's remove the right bulb holder and replace it with a P21 bulb. Let's also remove the left one and insert the new one. Next, let's remove the fog light bulb holder. To do this, we need to pull the tab outward and lower the plug, as shown in the video. Remove the bulb and connector, and insert the new bulb with the new connector. Repeat the same operation for the left bulbs as well.
Posted on 10 January 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHandbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |