Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Shift Gaiter on a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shifter boot

See other generations:
Video tutorial

It is quite common for the friction caused by gear changes, along with the wear of the covering not made of genuine leather, to make the gear shift gaiter frayed and worn. You can replace this gaiter with one made of genuine leather, and the disassembly is straightforward.

Start by detaching the frame at the base of the gaiter, which is attached via an internal elastic. Then remove the top part of the gear knob by prying at its base to access the fixing pin of the knob itself.

Once the pin and knob are removed, you can slide off the gaiter and proceed with the installation of the new one by first securing the base to the appropriate frame.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Lever Gaiter on a Fiat 500?
How to Replace the Gear Lever Gaiter on a Fiat 500?
Fiat 500 (2007-2022 / ) In this tutorial, you will see how to replace the gear gaiter on a Fiat 500, a very simple and quick operation. First, locate the slot that divides t…
How to Replace the Gear Knob Gaiter on the Fiat 500L
How to Replace the Gear Knob Gaiter on the Fiat 500L
Fiat 500 (2012-2023 / 500 L) To replace the gear knob gaiter on the Fiat 500L (the video shows the entire lever removed, but this procedure can be done with the gear lever instal…
How to Replace the Gear Shift Gaiter on a Fiat 500
How to Replace the Gear Shift Gaiter on a Fiat 500
Fiat 500 (2007-2024 / 312) Do you want to replace the leather gaiter under the gear knob of your Fiat 500? Let's see how to do it. First, use a screwdriver to remove the plasti…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos