Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Radio in the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Car stereo

This guide will show you the procedure for removing and replacing the standard radio with an Android or 2DIN type in the Fiat Panda. First, get inside the vehicle and begin removing the standard radio; disconnect the electrical connectors found at the back and the antenna cable, as shown in the video. At this point, install the new compatible radio, making any necessary modifications to the wiring; secure it in the central console and finally check its operation!

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) Before you start, sit in the driver’s seat of your Fiat Panda. Begin by inserting the extraction keys into the holes on the front of the radio. This …
Fiat Panda (2012-2026 / 319, MK 3) How to remove the original stereo on a Fiat Panda? Watch this video carefully to follow the guidelines for disassembly. Use the original or aftermark…
Fiat Panda (2003-2012 / 169, MK 2) Removing the radio from the Fiat Panda is possible using the specific U-shaped keys provided when purchasing the car. Insert these keys into the four…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos