Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on the Fiat 500 312

Model: Fiat 500 312 - Years 2007-2024
Part: Cabin air filter

To prevent dirt and dust from circulating in the ventilation system of the Fiat 500 version 312, a filter is installed on the intake. Periodically, you must replace the filter element to ensure its efficiency. To do this, sit in the front passenger seat, use a screwdriver to remove the screw above the air vent at the end of the central tunnel, and take off the panel. Once exposed, locate the cover of the filter box, open it, and remove the old filter to replace it with a new one; choose an activated carbon model for the best filtering power. Close the cover, refit the panel, and secure it with its screw.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin air filter of the Fiat 500 312
Replacement of the cabin air filter of the Fiat 500 312
Fiat 500 (2007-2024 / 312) The filter that prevents dust from entering the Fiat 500's cabin through the ventilation system must be replaced every fifteen thousand kilometers. T…
How to replace the cabin air filter of the Fiat 500
How to replace the cabin air filter of the Fiat 500
Fiat 500 (2007-2024 / 312) Today we will explain how to replace the cabin air filter on a 2012 Fiat 500. To perform the filter replacement, we need to get on board the vehicle …
How to Replace the Cabin Air Filter on a Fiat 500
How to Replace the Cabin Air Filter on a Fiat 500
Fiat 500 (2007-2021 / 312) Before you begin, enter the cabin of your Fiat 500. Start by unscrewing the screw that secures the cover near the cabin air filter, then remove the c…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos