Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Fiat Ducato 2.3 88KW

Model: Fiat Ducato X250 - Years 2006-2014
Part: Timing belt

In this video, you will learn how to change the timing belt on the Fiat Ducato 2.3: start by removing the belt, taking out the screws located under the camshaft, then position the phase locks to correctly place the belt when reassembling. You will have various gaskets to replace once the belt is removed; each gasket has a different colour to avoid confusion. The diagram shows the correct arrangement of the belt within the engine bay, and the belt must turn clockwise. Be careful when removing the pulleys, which should be done counterclockwise. During reassembly, ensure the two holes align perfectly.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
When to Replace the Timing Belt on the Fiat Ducato 2.3 Multijet
Fiat Ducato (2006-2014 / X250) This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 MultiJet
Guide to Replacing the Timing Belt of the Fiat Ducato 2.3 MultiJet
Fiat Ducato (2006-2014 / X250) Let's look at the instructions on how to disassemble and replace the timing belt of the Fiat Ducato 2.3 MultiJet. First, we open the vehicle's hood a…
Replacing the Timing Belt on a Fiat Ducato 2.0
Replacing the Timing Belt on a Fiat Ducato 2.0
Fiat Ducato (2006-2014 / X250) Today's instructions will show you the main steps to remove and replace the timing belt on a Fiat Ducato 2.0. First, open the bonnet and start removi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos