Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How to remove the steering wheel of the Fiat Ducato

Fiat Ducato - Video tutorial

Model: Fiat Ducato X250 - Years 2006-2014
Part: Steering wheel
Operation: How to remove the steering wheel of the Fiat Ducato

To remove the steering wheel on this vehicle model, the airbag must first be released; it is therefore suggested to start by disconnecting one pole of the battery to avoid any lights coming on; at this point intercept the holes present behind the spokes of the steering wheel in which to insert a fixed screwdriver with which to pry to release the fixing spring of the airbag itself: we recommend the use of a slightly curved screwdriver; once the airbag has been released, disconnect the relative sockets by first extracting the relative safety devices and then disconnecting the horn contact as well; realign the steering wheel in the straight wheels position, remove the protective cap of the fixing nut, unscrew the nut and remove the steering wheel.


Posted on 20 September 2023 by ScegliAuto



How to remove the steering wheel of a Fiat Ducato
Fiat Ducato (2002-2006 / ) Let's see how the steering wheel is removed on a Fiat Ducato. We first disassemble the airbag to later remove the steering wheel. We insert the screw
How to remove the airbag of a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before we can start, to work in total safety, we will need to disconnect the battery of our Fiat Ducato. Let's start by sitting in the driver's seat.
How to remove the steering wheel of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Let's see today how to remove the steering wheel and the relative airbag cushion in the previous generation Fiat Ducato. We insert two slotted screwd

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos