Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Air Pressure Sensor on the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Checks and maintenance

In this video, learn how to remove and clean the air pressure sensor located on the diesel engine of the Fiat 500X: it is situated behind the cylinder head cover, which needs to be removed by pulling it upwards. The sensor is located beneath the electrical connector shown in the video, and to remove it, you will need a T25 spanner, taking care not to drop the screw inside the engine. Extract the sensor and proceed to clean it using a non-oily universal cleaner; be careful not to touch the central diaphragm inside, as it is very delicate. Allow it to dry thoroughly before refitting it.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the External Temperature Sensor in the Fiat 500X?
Where is the External Temperature Sensor in the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) This video shows where the external temperature sensor is located in the Fiat 500X, useful if you need to replace it due to a fault. As shown, the se…
How do you reset the tire pressure warning light on the Fiat 500X?
How do you reset the tire pressure warning light on the Fiat 500X?
Fiat 500 (2014-2022 / 500 X) In order to reset the tire pressure warning light of the Fiat 500X, you will need to first check the correct tire pressure values and inflate the tir…
How to Replace the Air Filter on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) How do you replace the engine air filter on a Fiat 500X? Follow these steps: open the car door, pull up the engine compartment release lever located …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos