Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disable the FSP inertial lock sensor on a Fiat Doblò

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Checks and maintenance

In this video we can see how to deactivate the inertia lock sensor of a Fiat Doblò: this sensor is located on the passenger side, under the glove compartment. To unlock it, we need to turn on the instrument panel, and since the inertia sensor is locked, the "FSP" light will come on, and the right (or left) indicator arrow will light up and flash for a moment. Then it will light up on the other side and finally both will light up. At this point the "FSP" light will turn off and the car will start normally, because the lock sensor will have been reset.

Posted on 24 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the FPS light on the Fiat Doblo
How to reset the FPS light on the Fiat Doblo
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) The steps to follow to reset the FPS light, that is the inertia switch, of the Fiat Doblo are: - turn on the car's instrument panel; - activate the r…
How to Remove the EGR Valve on the Fiat Doblo MK1
How to Remove the EGR Valve on the Fiat Doblo MK1
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) This video provides instructions for removing the EGR valve for replacement or cleaning on the first series Fiat Doblo with a 1.9 JTD engine. First, …
Replacement of the Fiat Doblò windshield wiper blades
Replacement of the Fiat Doblò windshield wiper blades
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Over time, the rubber part of the Fiat Doblò's windshield wipers hardens and does not clean the glass well, so we need to replace them for our safety…

    Frequently Asked Questions

    • Doblo 2009-2021 - Where is the inertia switch on the Fiat Doblò? Read answer
    • Doblo 2009-2021 - Where is the horn on the Fiat Doblò located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos