Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Warning Light on a Fiat Doblo

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Warning light – error code

See other generations:
Video tutorial

Today, I will explain how to reset the engine warning light on a Fiat Doblo. To perform the reset, turn on the ignition and connect the OBD port to the diagnostic computer.

Once inside, select the vehicle model and year of manufacture. Select the option corresponding to the engine warning light and choose the reset option.

When the operation is complete, turn off the ignition to finish the reset and finally disconnect the OBD port from the diagnostic computer. Restart the vehicle to check that the operation was successful.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How do you reset the engine malfunction indicator light on the Fiat Doblo?
How do you reset the engine malfunction indicator light on the Fiat Doblo?
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) The engine malfunction warning on the onboard computer of a car, the Fiat Doblo in this case, but also in other cars, could occur for various reasons…
How can the engine malfunction indicator light be reset in the Fiat Doblò?
How can the engine malfunction indicator light be reset in the Fiat Doblò?
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) The engine malfunction indicator light identifies a series of issues and the correct solution, regarding the identification of one or more of these, …
How to reset the TPMS light on the Fiat Doblo
How to reset the TPMS light on the Fiat Doblo
Fiat Doblo (2022-2026 / Doblo -3) The steps to reset the TPMS light, related to tire pressure, on a Fiat Doblo vehicle are: -turn on the vehicle's instrument panel; -press the "HOME" …

    Frequently Asked Questions

    • Doblo 2009-2021 - How to reset the radio of the Fiat Doblò? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos