Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Pump in a Fiat Multipla

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Fuel pump

To access the fuel pump in your vehicle, you will need to 'dig in', which means lifting the cushions of the rear passenger seats, and consequently the panel beneath them. You will now have access to the first cap of the fuel tank; by removing it, you can disconnect the electrical connector and the feed and return pipes in the tank. Now, rotate the outer ring and you will finally be able to lift the last cap along with the pump in question. For reassembly, retrace the steps in reverse order.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Multipla (1998-2010 / MK 1) Below are the main instructions on how to remove and replace the timing belt on a Fiat Multipla. First, open the engine cover of the vehicle and begi…
Fiat Multipla (1998-2010 / MK 1) Before starting, open the bonnet of your Fiat Multipla by pulling the designated release handle located at the bottom left of the steering column. Be…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos