Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the starter motor of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024

Through this process, we will see the steps on how to disassemble and replace the windshield wiper motor of the Fiat 500. First, we open the hood of our car and start disassembling and removing the plastic partition found at the top, also removing the front windshield wipers; underneath, we will find the mechanism and the windshield wiper motor, as shown in the video. At this point, we unscrew the fastening screws of the windshield wiper motor, disconnecting the electrical connector to remove it; we apply the reverse process for reassembly!

Posted on 3 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Starter Motor on the Fiat 500
Removing and Replacing the Starter Motor on the Fiat 500
Fiat 500 (2007-2022 / 312) In this short and simple guide, learn how to remove and replace the starter motor on the Fiat 500 by following the instructions below. First, open th…
Removing the Starter Motor on a Fiat 500
Removing the Starter Motor on a Fiat 500
Fiat 500 (2007-2024 / 312) Need to replace the broken starter motor on a Fiat 500? Here’s how to remove it. Open and lift the front bonnet, disconnect the battery terminals. Lo…
Replacing the Starter Motor on the Fiat 500 1.2
Replacing the Starter Motor on the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) These brief and simple steps will guide you through the process of removing and replacing the starter motor on the Fiat 500 1.2. First, open the car'…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos