Do it yourself
Frequently asked questions about cars and motorcycles

How to turn on the heating in a Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

During the cold season, there’s nothing better than sitting comfortably in your vehicle and turning on the heating before starting the engine. First, fully start the car, then turn the blue cold dial to the red hot position.

As shown in the video, press the AC button and rotate to your desired heat level. This will activate the car's heating.

To turn off the heating, set the fan from 3 to 0, then centre the dial with the colours and finally press AC.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

Fiat 500 (2007-2024 / 312) In some Fiat cars, the following procedure is carried out to reset the service light, which is the warning for the oil change deadline. One of the mo…
Fiat 500 (2007-2024 / 312) To turn on the heating in a Fiat 500 with button controls, start the engine and wait for it to warm up. Press the ON/OFF button of the air conditioni…
Fiat 500 (2007-2022 / ) To turn on the fog lights and rear fog lights on a Fiat 500, switch on the instrument panel, turn on the dipped headlights, and to the right under th…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2021 - Why is the ESC not available on the Fiat 500? Read answer
    • 500 2007-2022 - Where is the inertia switch located in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos