Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Window Regulator Mechanism on a Fiat Croma

Model: Fiat Croma MK 1 - Years 2005-2010
Part: Power window motor

If you hear a noise similar to grinding when raising or lowering the door window, it is likely that the associated operating mechanism has been damaged, possibly due to broken plastic gears or a steel cable. To replace the mechanism, which usually does not include the motor, first remove the door panel. Take off the switch panel to access the fixing screws, then release the clips. Next, remove the aluminium under-panel to which the window regulator mechanism is attached, ensuring to loosen the fixing claws. Then, replace the mechanism and reassemble in reverse order.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Croma (2005-2010 / MK 1) Before starting, open the door of your Fiat Croma. Begin by prising off and removing the door inserts to access the screws that secure the door panel…
Fiat Croma (2005-2010 / MK 1) Before you can start, open the door of your Fiat Croma. Begin by prising out and removing the door inserts to access the screws that secure the door …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos