Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Ford Explorer

Model: Ford Explorer MK 4, U251 - Years: 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

In today's tutorial, you will learn how to remove the door panel of a fourth-generation Ford Explorer. Start by unscrewing the two screws beneath the door panel, then, using a plastic lever, detach the window switch panel and the plastic of the inner handle as shown in the video.

Next, continue by unscrewing the remaining screws located behind the window switch and the handle using a 7 mm spanner. Once done, lift the door panel to detach it from its place, disconnect its wiring, and finally remove it completely.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Ford Explorer
How to Remove the Front Door Panel of the Ford Explorer
Ford Explorer (1995-2001 / MK 2, Un150, Un105) In today's video tutorial, we will see the steps on how to remove and replace the front door panel of the Ford Explorer, following the instructions b…
How to Remove the Rear Door Panel of the Ford Explorer
How to Remove the Rear Door Panel of the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) This brief guide outlines the procedure for removing the rear door panel of the Ford Explorer. First, open the rear door and start by unfastening and…
How to Replace the Door Lock on a Ford Explorer?
How to Replace the Door Lock on a Ford Explorer?
Ford Explorer (1991-1994 / Un46, MK 1) To replace the door actuator on a Ford Explorer, loosen the screws securing the door panel: these are located at the internal handle and near the rea…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos