Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the Ford Explorer

Model: Ford Explorer MK 5, U502 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

This brief guide outlines the procedure for removing the rear door panel of the Ford Explorer. First, open the rear door and start by unfastening and removing the various plastic covers, prying them off from the sides; then disconnect the electric connector of the window switch and unscrew all the fixing screws of the door panel, as shown in the video.

At this point, pry from the sides to completely remove the door panel; for reassembly, simply follow the reverse procedure!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to remove the rear door panel on the Ford Explorer?
How to remove the rear door panel on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, you can see how to remove the rear door panel on the Ford Explorer, an extremely simple and quick operation. First, open the door y…
How to Remove the Front Door Panel of the Ford Explorer
How to Remove the Front Door Panel of the Ford Explorer
Ford Explorer (1995-2001 / MK 2, Un150, Un105) In today's video tutorial, we will see the steps on how to remove and replace the front door panel of the Ford Explorer, following the instructions b…
How to Remove the Door Panel of a Ford Explorer
How to Remove the Door Panel of a Ford Explorer
Ford Explorer (2006-2010 / MK 4, U251) In today's tutorial, you will learn how to remove the door panel of a fourth-generation Ford Explorer. Start by unscrewing the two screws beneath the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos