Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Brake Drum and Shoes

Model: Ford Focus MK 1 - Years 1998-2004
Part: Brake drums and shoes

For this operation, you will need the following tools: socket wrench, screwdriver set, brake cleaning fluid, and rags. First step: lift the vehicle and remove the wheel bolts and the wheel itself. Remove the protective cover from the hub and take off the nut, then dismantle the drum using the appropriate puller. If it is stuck, use a hammer to loosen it. Use a wire brush to remove dirt and rust from the inside and outside of the drum. Unscrew the brake screws and remove all parts. Clean all brake components thoroughly from rust, mud, and deposits to prevent seizing. Refit the drum with the nut and secure it with the cover.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Drum and Shoes
How to Replace Brake Drum and Shoes
Ford Focus (1998-2004 / MK 1) Remove the protective cover from the hub and take off the nut, then dismantle the drum using the appropriate puller. Remove both shoes from the suppo…
How to Install or Replace Brake Drums and Shoes
How to Install or Replace Brake Drums and Shoes
Ford Focus (1998-2004 / MK 1) If you have a Ford Focus and want to replace the brake drums and shoes, this tutorial can help you. Secure the vehicle on a ramp and remove the rear …
Replacing Brake Shoes and Actuator Cylinder on a Drum Brake System
Replacing Brake Shoes and Actuator Cylinder on a Drum Brake System
Ford Focus (1998-2004 / MK 1) In this video, the brake shoes and the rear wheel cylinder of a Ford Focus are replaced. First, remove the wheel cover using a screwdriver, then remo…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos