Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the air conditioning engine of the Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Air conditioning
Operation: How to replace the air conditioning engine of the Ford Focus

For this simple and quick operation you can follow this short video guide, in fact the first step illustrated is to disconnect the cables from the battery in order to protect the most delicate circuits, now you will have to remove the screws that secure the glove box panel. in front of the front passenger seat, so in this way you will have access to the motor of the passenger compartment air conditioning circuit, then disconnect the plugs connected to the motor and remove the bolts that secure it, then retrace the steps described in reverse for the reassembly of the various components.


Posted on 5 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2004-2011 - Why is the Ford Focus air conditioning noisy? Read Answer
    • Focus 2011-2018 - How much refrigerant gas do you need for the Ford Focus 2.0 TDCi? Read Answer
    • Focus 1998-2004 - Where are the Ford Focus air conditioning gas refill attachments located? Read Answer
    • Focus 2011-2018 - How much gas does it take to recharge the Ford Focus air conditioning? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos