Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb of a Ford Ka

Model: Ford Ka MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

In this video, you can see how to change the dipped beam bulb of a Ford Ka MK2: if you open the bonnet and position yourself parallel to the vehicle, you can see - using a portable lamp - that the access covers to the headlights are very accessible.

Simply pull the electrical connector of the central one (dipped beam), and remove the rubber cap. Behind it, you will find the bulb with its safety clip; just remove the clip and pull out the bulb holder with the bulb inside.

Replace it, taking care not to touch it with bare hands, and then refit it into its housing. Refit the clip, the rubber cap, and the electrical connector, and the operation is complete.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb of the Ford KA
Replacing the Front Headlight Bulb of the Ford KA
Ford Ka (1996-2008 / MK 1) Today, discover how to remove and replace the front headlight bulb of the Ford KA. To access the front headlight bulb, it will be necessary to remove…
Replacing the Headlight Bulbs on the Ford Ka
Replacing the Headlight Bulbs on the Ford Ka
Ford Ka (2016-2019 / MK 3) If the dipped beam bulb burns out, replace it as soon as possible for your safety and to avoid penalties. Open the bonnet and position yourself in fr…
How to Replace the Front Headlamp Bulb in the Ford Ka?
How to Replace the Front Headlamp Bulb in the Ford Ka?
Ford Ka (1996-2008 / MK 1) To replace the front headlamp bulb in the Ford Ka, open the bonnet to access the rear of the headlamp containing the bulb to be replaced. Remove the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos