Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Glove Box on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Dashboard

See other generations:
Video tutorial

In this video, learn how to remove the front glove box on a Ford Focus. Open the door and remove the rubber seal from the perimeter of the car's frame.

Use a plastic lever to detach the trim on the side of the dashboard, then pull out the cloth located at the bottom of the glove box. Get a screwdriver or a cordless drill, open the glove box, and unscrew the fastening screws around the perimeter. Once this is done, pull the glove box out and disconnect the power cables.

Finally, insert the new piece into the dashboard and reassemble all the components of the glove box as you disassembled them earlier.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Compartment on a Ford Focus
How to Remove the Glove Compartment on a Ford Focus
Ford Focus (2011-2018 / MK 3) How to remove the glove compartment on a Ford Focus? Follow these steps: use a plastic lever to detach the trim on the right side of the dashboard. O…
How to Remove the Glove Compartment from the Ford Focus
How to Remove the Glove Compartment from the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's instructions will show you how to remove the passenger side glove compartment from the Ford Focus in simple steps. First, open the passenger …
Removing the Glove Box on a Ford Focus
Removing the Glove Box on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to remove the glove box in your car's dashboard? Here’s how to disassemble the glove box on a Ford Focus. Open the glove compartment and locate …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos