Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program a new remote control for the Ford Edge?

Model: Ford Edge MK 2, Cd539 - Years 2015-2024
Part: Key

In this tutorial, we can see how to program a new remote control in the Ford Edge, an extremely simple and quick operation. To do this, we will obviously need a working key. First of all, let's go inside the cabin, then lift the armrest, remove the bottom panel, and locate the programming slot below the console. Next, we place the working remote control in the slot, turn on the ignition, wait for the end of the audible signal, and turn it off. At this point, we repeat the operation with all the remotes to be programmed, start the vehicle, and test that the operation was successful.

Posted on 2 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to program a remote control in the Ford Edge?
How to program a remote control in the Ford Edge?
Ford Edge (2006-2014 / U387, MK 1) In this tutorial we can see how to program a remote control in the Ford Edge, a very simple and quick operation. To do this, we will obviously need a…
How to Replace the Remote Battery of the Ford Edge?
How to Replace the Remote Battery of the Ford Edge?
Ford Edge (2006-2014 / U387, MK 1) To replace the battery of the Ford Edge remote, slide the lever on the back of the device to remove the key from the top. Once removed, lever inside …
How to Replace the Key Fob Battery on a Ford Edge
How to Replace the Key Fob Battery on a Ford Edge
Ford Edge (2015-2024 / MK 2, Cd539) This video tutorial demonstrates how to replace the battery in the key fob of a second-generation Ford Edge, produced from 2017 to 2020. First, press…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos