|
Do it yourself
| |||
| ||||
Video tutorial
Let's see how to change the key fob battery of a Ford Edge: you will need two CR2025 batteries, which can be easily found in any supermarket or electronics store. On the top of the key, there is a black button: press it down and, while holding it, pull off the rear plastic cover. Now you will see the inside of the fob, with an outer casing and an inner plastic piece holding the electronic board. Using the tip of a screwdriver, insert it into the upper slot (where the ring was) between the two plastic shells. Gently lever it open, and once opened, you will see the two button batteries side by side. Remove them from their housing and insert the new ones, ensuring the correct polarity. Reposition the inner shell onto the outer one: first guide the two ring-shaped hooks into their housings, press until you hear the clicks of closure, and then replace the rear cover, and you’re done.
Posted on 12 August 2026 by ScegliAuto
Related tutorials
Ford Edge
(2006-2014 /
MK 1, U387)
To replace the battery in the key fob of the Ford Edge, leverage inside the groove that divides the two halves of the fob, on the side opposite to wh…
Ford Edge
(2015-2024 /
MK 2, Cd539)
This video tutorial demonstrates how to replace the battery in the key fob of a second-generation Ford Edge, produced from 2017 to 2020. First, press…
Ford Edge
(2015-2024 /
MK 2, Cd539)
To replace the key battery of your new Ford Edge, simply follow the steps described below. The entire procedure takes only a few seconds and you will…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.102
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
