Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore maintenance for the Ford Ka

Model: Ford Ka MK 3 - Years 2016-2019
Part: Onboard computer

In this article, with the help of the video posted at the bottom, we will see how to reset the maintenance light on the Ford Ka. We recommend performing this procedure only after having the car serviced. To reset this light, we must first start the instrument panel, then press and hold the button on the instrument panel for about 10 seconds, keep it pressed until the word "off" appears. At this point, we must turn off the instrument panel, remove the key, reinsert the key, and start the instrument panel again. At this point, the procedure will be complete and the light will be reset.

Posted on 22 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight on a Ford Ka
How to Remove the Front Headlight on a Ford Ka
Ford Ka (1996-2008 / MK 1) Before you start, open the front bonnet of your Ford Ka. Begin by unclipping and slightly moving the front wing near the headlight. Next, unscrew and…
Where to Find the OBD Port on a Ford Ka 2
Where to Find the OBD Port on a Ford Ka 2
Ford Ka (2008-2016 / MK 2) If you have a second series Ford Ka and want to easily locate the OBD port, simply follow the steps outlined below. First, get into the vehicle and r…
Where is the fuse box located in the 2008 Ford Ka?
Where is the fuse box located in the 2008 Ford Ka?
Ford Ka (2008-2016 / MK 2) The fuse box in your 2008 Ford Ka is located inside the cabin. Follow these steps to easily locate it. First, get into the driver's seat and ensure y…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos