Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the 2015 Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Warning light – error code

The TPMS warning light reset on a 2015 Ford Transit vehicle should only be performed after adjusting the tire pressure. Once the correct pressure is set following the manufacturer's instructions on a sticker located on the door, you can proceed with the reset of the warning light. To perform the reset, first turn on the instrument panel and then connect the diagnostic tester. If there are no issues, the light will automatically turn off as soon as you start the vehicle and drive a few kilometers while maintaining 2000 RPM.

Posted on 19 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on the 2020 Ford Transit
How to Reset the TPMS Light on the 2020 Ford Transit
Ford Transit (2014-2024 / MK 8) After adjusting the tyre pressures, you need to reset the corresponding light, known as the TPMS light. The TPMS light on the 2020 Ford Transit is re…
How to Reset the Oil Change Warning Light on the 2019 Ford Transit
How to Reset the Oil Change Warning Light on the 2019 Ford Transit
Ford Transit (2014-2024 / MK 8) In this article, you will learn how to reset the oil change warning light on the 2019 Ford Transit. To reset the light, turn the key to the ON positi…
How to Reset the Oil Warning Light on the 2017 Ford Transit
How to Reset the Oil Warning Light on the 2017 Ford Transit
Ford Transit (2014-2024 / MK 8) In this article, we will see how to reset the oil warning light on the 2017 Ford Transit. To reset the light, turn off the ignition and the engine, t…

    Frequently Asked Questions

    • Transit 2000-2006 - Where is the radio code located for the Ford Transit 6000 CD? Read answer
    • Transit 2014-2024 - Why does the brake light stay on after a pad change in a Ford Transit? Read answer
    • Transit 2006-2014 - Why is the glow plug light flashing on my Ford Transit? Read answer
    • Transit 2006-2014 - How do you reset the brake pad warning light on Ford Transit Custom? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos