Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the 2020 Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Tire pressure warning light

After adjusting the tyre pressures, you need to reset the corresponding light, known as the TPMS light. The TPMS light on the 2020 Ford Transit is reset as follows: -turn on the vehicle's ignition; -press the OK button on the steering wheel to access the menu; -select settings/maintenance/TPMS; -press the OK button for a few seconds; After this, you will have reset the tyre pressure light. If the reset does not succeed, it can be performed a second time, but if the light continues to flash, it means something was not done correctly during the adjustment.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue warning light on a Ford Transit Custom
How to reset the AdBlue warning light on a Ford Transit Custom
Ford Transit (2014-2024 / MK 8) In this video, we will see how to reset the AdBlue warning light on the Ford Transit Custom: The warning appears stating that in a considerable numbe…
How to Reset the Oil Change Light on a Ford Transit Van?
How to Reset the Oil Change Light on a Ford Transit Van?
Ford Transit (2014-2024 / MK 8) This tutorial shows how to reset the engine oil change light on a Ford Transit van, a very simple and quick operation to be performed only after comp…
How to reset the TPMS light on the 2015 Ford Transit
How to reset the TPMS light on the 2015 Ford Transit
Ford Transit (2014-2024 / MK 8) The TPMS warning light reset on a 2015 Ford Transit vehicle should only be performed after adjusting the tire pressure. Once the correct pressure is …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos