Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Door trim panel

The steps outlined in this guide will show us how to disassemble and remove the front door panel of the Ford C-Max. First, we open the front door and start by removing the plastic cover of the handle and the caps on the panel; then we unscrew all the fixing screws using a torx screwdriver, as shown in the video. At this point, we disconnect the electrical connector of the window switch panel, levering on the sides to detach and remove the panel; finally, we disconnect the handle cable, and reassemble everything!

Posted on 23 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Ford C-Max
Disassembly of the front door panel of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Today we will discover the necessary instructions that will allow us to disassemble and replace the front door panel of the Ford C-Max. First, we ope…
How to Fit the Front Bumper on a Ford C-Max
How to Fit the Front Bumper on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the bonnet of your Ford C-Max. Begin by positioning the front bumper in its housing. Next, secure the rear fastening clips. Onc…
How to disassemble the interior rearview mirror in the Ford C-MAX?
How to disassemble the interior rearview mirror in the Ford C-MAX?
Ford C Max (2010-2019 / MK 2) In this tutorial we can see how to disassemble the interior rearview mirror in the Ford C-MAX, an extremely simple and quick operation. First of all,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos