Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the tires of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tires

In this guide we will see the instructions that will allow us to disassemble and replace the tires of the Ford Fiesta. First of all, lift the vehicle and start by removing the front wheel, unscrewing the fastening bolts; then we proceed to completely remove the air from the tire, unscrewing the inner valve, as shown in the video. At this point, we carry out the procedure for removing the tire from the rim, replacing it with the new one (respecting the measurements); finally, we reassemble the wheel and proceed in the same way with the replacement, if necessary, of the other tires.

Posted on 7 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Ford Fiesta?
How to Reset the Tyre Pressure Light on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To reset the tyre pressure light on the Ford Fiesta, turn on the ignition by rotating the key in the ignition switch: once the dashboard is on, selec…
How to reset the tyre pressure warning light on the Ford Fiesta?
How to reset the tyre pressure warning light on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To reset the tyre pressure warning light on the Ford Fiesta, first inflate the tyres to the correct pressure. Once the tyres are inflated, press the …
How do you reset the tire pressure light on the Ford Fiesta?
How do you reset the tire pressure light on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To reset the tire pressure warning light of the Ford Fiesta, you need to inflate the tires to the recommended pressure value: this value will be indi…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - Why are the tire sensors not being detected on the Ford Fiesta? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos