Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper Grille on Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Grille

In this video, see how to remove the grille located on the front bumper of a Ford Focus. Lift the bonnet and secure it. Using a plastic spatula or screwdriver, detach the fastening rivets on the bumper cover. After removing the cover, unscrew the grille bolts with a screwdriver. Finally, remove the previously detached grille. To proceed with the installation: secure the grille onto the bumper as shown in the video and tighten all screws and rivets around its perimeter. Check the correct installation of the parts.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper Grille on a Ford Focus
How to Remove the Front Bumper Grille on a Ford Focus
Ford Focus (2011-2018 / MK 3) Want to replace the central air grille on your vehicle? Here’s how to remove the front bumper grille on a Ford Focus: using a plastic lever or screwd…
Removing Front Bumper on Ford Focus
Removing Front Bumper on Ford Focus
Ford Focus (1998-2004 / MK 1) Do you want to remove the front bumper from a Ford Focus? Lift the front bonnet and let's see how to remove the front bumper. Remove the central gril…
How to Remove the Centre Grille on Ford Focus
How to Remove the Centre Grille on Ford Focus
Ford Focus (2011-2018 / MK 3) How to remove the centre grille located on the front bumper of a Ford Focus. Once the car's bumper is removed, use a plastic lever or screwdriver to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos