Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the armrest in the Ford Escape?

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial we can see how to replace the armrest in the Ford Escape, an extremely simple and quick operation. First of all, let's go inside the cabin, then lift the armrest by unlocking it from the base.

We then lever along the entire perimeter of the inner cover using a plastic spatula, so as not to leave any marks, unhook the hinge element and separate the cover itself. We then unscrew the screws just released using a Torx key, remove the armrest from the support and install the replacement.


Posted on 27 December 2024 by ScegliAuto


Related tutorials

Removing the Center Console of the Ford Escape
Removing the Center Console of the Ford Escape
Ford Escape (2013-2019 / MK 3) Today's video will show you how to remove and replace the center console of the Ford Escape, as well as the Ford Kuga, in simple steps. First, get in…
Where to Find the OBD Port on a 2005 Ford Escape
Where to Find the OBD Port on a 2005 Ford Escape
Ford Escape (2001-2007 / MK 1) Finding the OBD port in your first-generation 2005 Ford Escape is very simple, and with the following guide, you will have no difficulty. First, ensu…
How to reset the oil light on the Ford Escape 3
How to reset the oil light on the Ford Escape 3
Ford Escape (2013-2019 / MK 3) If you want to manually reset the oil engine light of your third edition Ford Escape, all you have to do is carefully follow the steps described in t…

    Frequently Asked Questions

    • Escape 2008-2012 - What problems does the Ford Escape door actuator have? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos