Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Indicator on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Service warning light

To reset the service indicator on a Ford Kuga, follow these simple steps. Enter the vehicle, put it in neutral, and turn on the ignition. Press the accelerator and brake pedals simultaneously, then turn off and on the ignition. Release the pedals when the message appears on the display. Check the radio display for the mileage until the next oil change service. Always remember to make changes to the onboard computer with the ignition off. Finally, turn off the ignition and verify the settings made.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the side indicator and mirror cover on a Ford Kuga
How to replace the side indicator and mirror cover on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing the side indicator and mirror cover on a Ford Kuga is straightforward. Lower the mirror glass and, using a flat screwdriver or a thin tool,…
How to reset the Oil Service light on a Ford Kuga?
How to reset the Oil Service light on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To reset the Oil Service light on a Ford Kuga, turn on the instrument cluster to check that the light is illuminated. Then, press and hold the accele…
How to Reset the Service Light in a Ford Kuga?
How to Reset the Service Light in a Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) This tutorial explains how to reset the service light in a Ford Kuga, a very simple and quick operation to perform only after completing all schedule…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos