Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Side mirror

If the external rearview mirror of your Ford Fiesta is broken and you want to replace it with a new one, just carefully read the following instructions and put them into practice in order to complete the replacement safely and correctly. First of all, turn off the car and remove the plastic cover located on the inside of the door. Then, disconnect the electrical cable and unscrew all the various screws that hold the mirror in place. At this point, completely remove the rearview mirror and replace it with a new one. To install it, just follow the same steps as before, but in reverse order.

Posted on 6 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on the Ford Fiesta?
How to Replace the External Wing Mirror on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the external wing mirror on the Ford Fiesta, loosen all the screws securing the corresponding door panel so that it can be removed. The sc…
How to replace the exterior rearview mirror of the Ford Fiesta.
How to replace the exterior rearview mirror of the Ford Fiesta.
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Below we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the Ford Fiesta. First, let's open t…
How to Replace the External Wing Mirror on the Ford Fiesta?
How to Replace the External Wing Mirror on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, you can see how to replace the external wing mirror on the Ford Fiesta, a very simple and quick operation. First, open the door you…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos