Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to unlock the radio of a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Car stereo

In this video we can see how to unlock the radio of a Ford Focus MK2, after it has been locked due to an intervention on the battery, for example; in fact, in this case the radio must be unlocked by entering a code that is normally included in the onboard documentation, usually in the owner's manual (if you can't find it in the first pages, check under "radio") or stuck with a sticker inside the glove compartment. If you can't find it, you can obtain it through the website instant-radio-code.com by entering the extended chassis number (17 digits) found in the registration booklet in the second section under the letter E). Entering the code is very simple: just press the buttons corresponding to the code on the radio keypad and then press "enter".

Posted on 12 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Unlock the Sony Radio in a Ford Focus?
How to Unlock the Sony Radio in a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To unlock the Sony radio in a Ford Focus, turn on the ignition so that the radio can also be powered on. Next, press and hold the buttons 1 and 6 on …
How to unlock the radio of the 2006 Ford Focus
How to unlock the radio of the 2006 Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) When the radio on the 2006 Ford Focus locks due to battery replacement or a blown fuse, it is necessary to enter the radio unlock code to make it wor…
How to Unlock the Radio of the 2011 Ford Focus
How to Unlock the Radio of the 2011 Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) If you need to unlock the radio on this model of vehicle, the description below provides all the necessary information, and you can also watch the tu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos