Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light of a Ford Fusion

Model: Ford Fusion North America MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light

See other generations:
Video tutorial

In the selected tutorial, we see how to replace a rear headlight of a Ford Fusion car. First, open the trunk of the vehicle to access the rear part of the headlight; remove the internal cover using a Phillips screwdriver, this way you can locate the screws that secure the headlight.

At this point, use a ratchet wrench to unscrew the screws that attach the headlight to the body and then disconnect the electrical connectors.

Finally, carefully remove the headlight from its housing by pulling outward and proceed with the replacement.


Posted on 16 February 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight on the Ford Fusion North America
How to Replace the Rear Headlight on the Ford Fusion North America
Ford Fusion North America (2013-2020 / MK 2) In this guide, you will see how to remove and replace the rear headlight on the Ford Fusion North America in simple and quick steps. First, open the …
Removing the Taillights and Bulbs on a Ford Fusion
Removing the Taillights and Bulbs on a Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) Today, let's go through the instructions to remove and replace the taillight and its bulbs on a Ford Fusion. First, open the trunk lid and start by r…
Replacement of the cabin fan of the Ford Fusion
Replacement of the cabin fan of the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) These short and simple instructions will show us how to disassemble and replace the cabin fan of the Ford Fusion. First of all, we open the front pas…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos