Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Brake pads

Replacing the brake pads is a maintenance task that you can certainly do yourself, but with the right precautions as brakes are a crucial safety element. Lift the vehicle to remove the front wheel, remove the protective caps on the caliper mounting pins, and unscrew them to detach the caliper. Then, remove the old pads, clean any dirt residue, insert the new pads, retract the caliper piston, and reposition the caliper on the bracket, tightening the mounting pins and reapplying the caps.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Brake Pads on a Ford Focus
How to Change the Brake Pads on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Changing the brake pads on a Ford Focus? Let's remove the wheel and the pads. Unscrew the locking pin of the brake caliper and remove it from the whe…
How to Change the Rear Brake Pads on a Ford Focus
How to Change the Rear Brake Pads on a Ford Focus
Ford Focus (2011-2018 / MK 3) How to change the rear brake pads on a Ford Focus? Lift the car with a column jack to the desired height, then remove the wheel (using a telescopic w…
How to Replace the Front Brake Pads on a Ford Focus MK1
How to Replace the Front Brake Pads on a Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In this video, see how to replace the brake pads on a Ford Focus MK1: first, open the bonnet and remove the cap from the brake fluid reservoir, then …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos