Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on the Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Resetting the tire pressure warning light in the Ford Focus, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have restored the correct pressure of each tire following the instructions in the manual.

First, go inside the car, then turn on the instrument panel and, by pressing the left arrow on the steering wheel, reach the general menu. Then enter "Settings", "Driver assist", "Tyre monitor", and perform the reset by holding down the "OK" button.

To complete the procedure, simply restart the vehicle.


Posted on 19 April 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Ford Focus MK3
How to Reset the Tyre Pressure Light on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) This guide explains how to reset the tyre pressure light on a third-generation Ford Focus; before performing the steps, ensure all four tyres are at …
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …
How to Reset the Tyre Pressure Warning Light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Follow this guide for instructions to reset the tyre pressure warning light on the Ford Focus. First, get in the vehicle and turn on the instrument p…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos