Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the service of a Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Service warning light

In this very short video guide today, we are shown how to reset the service light, which indicates the remaining life of the engine oil, on a Ford Transit, model produced from 2014 to 2023. We start the operation by turning on the vehicle's instrument panel without starting the engine, then, as shown in the video, we need to press and hold down both the brake and accelerator pedals at the same time. Once we do this, we will see the notification of the reset in progress, so we continue to hold down both pedals until the reset is complete with the corresponding notification.

Posted on 25 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2000-2006 / MK 6) The operation of resetting the Service light that appears on the instrument panel of the Ford Transit involves inserting the ignition key into the co…
Ford Transit (2014-2024 / MK 8) Performing the reset of the maintenance light on the 2016 Ford Transit is an operation that follows very simple steps to be carried out independently…
Ford Transit (2014-2024 / MK 8) To reset the service light on the Ford Transit, turn on the instrument panel without starting the engine and note the message "oil life required". Pr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos