Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the Start & Stop in the Ford Escape?

Model: Ford Escape MK 3 - Years 2013-2019
Part: Checks and maintenance

In this tutorial, we can see how to deactivate the Start & Stop system in the Ford Escape, an extremely simple and quick operation to be carried out, for example, in case we find the system too intrusive. First of all, let's go inside the car, then insert the key and start the vehicle. Next, we locate the button with an "A" circled on it placed in the central console, below the air conditioning controls, and press it. The orange "OFF" light turning on will indicate that the system has been successfully deactivated. However, this is not permanent, as the vehicle will always start with the Start & Stop system active.

Posted on 15 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Light and Third Brake Light on the Ford Escape
How to Replace the Tail Light and Third Brake Light on the Ford Escape
Ford Escape (2008-2012 / MK 2) In this guide, we will go over the instructions that will allow us to remove and replace the tail light and its bulbs for the Ford Escape. First, let…
How to deactivate the 4x4 traction of the Ford Escape
How to deactivate the 4x4 traction of the Ford Escape
Ford Escape (2013-2019 / MK 3) These short and simple steps will show us how to deactivate the 4x4 traction of the Ford Escape; however, it is recommended not to deactivate the all…
How to disassemble the third brake light on a Ford Escape
How to disassemble the third brake light on a Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see how to disassemble the third brake light of a third generation Ford Escape. So, to remove the third brake light we need to release …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos