Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor of a Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tire pressure warning light on a Ford Focus, start by turning on the ignition without starting the engine. Use the buttons on the steering wheel to access the system menu.

Navigate through the options on the display until you find the section dedicated to tire pressure monitoring. Once inside, select the option for reset or calibration, which may be called "Reset TPMS" or similar.

Confirm the choice by following the instructions on the screen, allowing the system to record the current pressures as reference values. After completing the procedure, the light should turn off, indicating that the system has accepted the new parameters.

To verify that everything is working correctly, turn off and on the ignition. If the signal is no longer present, the reset has been successful and tire monitoring is operational again.


Posted on 16 June 2025 by ScegliAuto


Related tutorials

How to reset the tire pressure sensor on the Ford Focus 3
How to reset the tire pressure sensor on the Ford Focus 3
Ford Focus (2011-2018 / MK 3) In this new guide, we will explain the steps you need to follow if you intend to manually reset the tire pressure warning light on your third edition…
How to reset the tire pressure sensor of the Ford Focus 2
How to reset the tire pressure sensor of the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) If you own a second edition Ford Focus and want to manually reset the tire pressure warning light, all you need to do is carefully follow the steps d…
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are required for this operation. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos