Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Function and location of the AdBlue control unit on the Ford Ranger

Model: Ford Ranger T6, P375, PX - Years 2011-2023
Part: Control unit

In this video we can see the position of the AdBlue control unit of the Ford Ranger, which is located under the glove compartment, on the passenger side - for left-hand drive vehicles - where, entering behind the compartment, we can find the control unit module, which is inside a supporting case. This control unit is a fundamental component of the selective catalytic reduction (SCR) system designed to reduce nitrogen oxide (NOx) emissions from diesel engines. This system works with AdBlue, which is an aqueous urea solution, which is injected into the exhaust gases at high temperatures. The control unit monitors the entire process, dosing the right amount of AdBlue, based on the engine's operating conditions.

Posted on 27 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to top up AdBlue and reset the warning light on the Ford Ranger
How to top up AdBlue and reset the warning light on the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) In this guide we will see the main information on how to top up the AdBlue liquid and how to reset the warning light on the Ford Ranger. When the AdB…
How to deactivate the AdBlue warning light on the Ford Ranger
How to deactivate the AdBlue warning light on the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) In this short and simple guide, we will see how to deactivate the warning light for topping up the AdBlue liquid in the Ford Ranger. To perform the r…
How to Reset the AdBlue Warning Light on a Ford Ranger After Refuelling
How to Reset the AdBlue Warning Light on a Ford Ranger After Refuelling
Ford Ranger (2011-2023 / T6, P375, PX) In this video, we will see how to reset the AdBlue warning light on a Ford Ranger after correctly refuelling with AdBlue. The light did not reset its…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos