Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you deactivate the alarm system in the Ford Fiesta 1.4 TDCi?

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Checks and maintenance

The immobilizer anti-theft system of the Ford Fiesta can be compared to many other Ford cars in terms of the possibility of deactivating it, and in this tutorial we find confirmation, in fact the car shown is not a Ford Fiesta, but the method can easily be considered for it as well. The plastic ring shown is installed on the ignition key cylinder and is coded to recognize the key code and unlock the aforementioned immobilizer. In case of problems, we disassemble the ring and bypass it by connecting the electrical wires at the back.

Posted on 7 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the glow plugs in the Ford Fiesta 1.4 TDCi?
How to replace the glow plugs in the Ford Fiesta 1.4 TDCi?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this tutorial we can see how to replace the glow plugs in the Ford Fiesta 1.4 TDCi, a simple operation but one that requires good manual skills. F…
Replacing the Fuel Filter of the Ford Fiesta 1.5 TDCi
Replacing the Fuel Filter of the Ford Fiesta 1.5 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Below are the instructions for removing and replacing the fuel filter of the Ford Fiesta 1.5 TDCi. First, open the bonnet of the vehicle and start di…
Replacing Camshaft Sensor on Ford Fiesta 1.4 TDCi
Replacing Camshaft Sensor on Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video, learn how to remove and replace the camshaft speed sensor on a Ford Fiesta 1.4 TDCi. First, open the bonnet of your car and disconnect…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos