Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Ford Taurus

Model: Ford Taurus MK 6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

If you are experiencing problems with one of the headlights of your Ford Taurus, don't worry because with the following guide you will be able to replace it by yourself and without any difficulty. First of all, lift the front hood and make sure the engine compartment is not hot, then proceed with the removal of the protective cap located behind the headlight and disconnect the electrical connector.

Then replace the old faulty bulb with a new one of the same type. Finally, reconnect the electrical connector and reassemble the dust cap.


Posted on 8 July 2025 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the Ford Taurus
How to replace the front headlight bulb of the Ford Taurus
Ford Taurus (2010-2016 / MK 6) Replacing a car bulb is a simple and quick operation to be carried out independently. Today, specifically, we will see how to replace the front hole …
How to Replace the Headlight Bulb on a Ford Taurus
How to Replace the Headlight Bulb on a Ford Taurus
Ford Taurus (2000-2007 / MK 4) To replace the headlight bulb on a Ford Taurus, open the hood to access the screws that secure the headlight from the top. This will allow you to rem…
How to Replace the Front Headlight Bulb on a Ford Taurus
How to Replace the Front Headlight Bulb on a Ford Taurus
Ford Taurus (2010-2016 / MK 6) To replace the front headlight bulb on a Ford Taurus, open the hood to unscrew the screws securing the plastic cover at the front of the engine compa…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos