Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the BMS of a Ford Mondeo MK5?

Model: Ford Mondeo / Fusion MK 5 - Years 2022-2026
Part: Battery

In this video, we see how to reset the BMS (Battery Monitoring System) of a Ford Mondeo MK5: you need an OBD scanner and an app like FORScan or Carly. Connect the scanner to the OBD port (located under the dashboard, on the driver's side), turn on the ignition, open the app and connect it to the scanner. Follow the instructions in the video for the reset. However, you can also try a manual procedure. Everything must be turned off: turn on only the low beams, which must remain on throughout the procedure. Press the brake pedal all the way down five times, then press the hazard button three times. After the third press, the battery light should start flashing, indicating that the reset has been successful. Turn off the low beams. The procedure is complete.

Posted on 10 September 2025 by ScegliAuto

Video tutorial

Related tutorials

BMS Reset on a Ford Mondeo MK5
BMS Reset on a Ford Mondeo MK5
Ford Mondeo / Fusion (2022-2026 / MK 5) In today's video, you will see how to reset the BMS, or Battery Monitoring System, on a Ford Mondeo, fifth generation model produced from 2022 onward…
How to Reset the Battery Management System (BMS) on a Ford Mondeo
How to Reset the Battery Management System (BMS) on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Here are the instructions for resetting the Battery Management System (BMS) on a Ford Mondeo after a battery change. First, get into the vehicle and …
Ford Mondeo Mk5: how to reset the battery management system (BMS)
Ford Mondeo Mk5: how to reset the battery management system (BMS)
Ford Mondeo / Fusion (2022-2026 / MK 5) After replacing the battery in the Ford Mondeo Mk5, it is advisable to reset the BMS system, which is the module that monitors the state of charge of…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos