Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

BMS Reset on a Ford Mondeo MK5

Model: Ford Mondeo / Fusion MK 5 - Years 2022-2026
Part: Warning light – error code

In today's video, you will see how to reset the BMS, or Battery Monitoring System, on a Ford Mondeo, fifth generation model produced from 2022 onwards. After changing the vehicle's battery, it is necessary to reset this monitoring system. To do this, start by turning on the ignition without starting the engine, then pull the left lever on the steering wheel towards you five times consecutively, followed by pressing the brake pedal three times. After this, you will see the red battery warning light start to flash, so wait for the light to become steady, and you will have completed the task.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Battery Management System (BMS) on a Ford Mondeo
How to Reset the Battery Management System (BMS) on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) Here are the instructions for resetting the Battery Management System (BMS) on a Ford Mondeo after a battery change. First, get into the vehicle and …
Ford Mondeo Mk5: how to reset the battery management system (BMS)
Ford Mondeo Mk5: how to reset the battery management system (BMS)
Ford Mondeo / Fusion (2022-2026 / MK 5) After replacing the battery in the Ford Mondeo Mk5, it is advisable to reset the BMS system, which is the module that monitors the state of charge of…
How to Manually Reset the BMS on the Ford Mondeo
How to Manually Reset the BMS on the Ford Mondeo
Ford Mondeo / Fusion (2022-2026 / MK 5) For the Ford Mondeo MK5, there is a manual procedure to reset the BMS (Battery Management System) after replacing the battery without the need for di…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos